Walkable Climate Chamber

The Europe customer prefer to buy the walkable climate chamber from China. Most of the walkable climate chamber is custom size and not convenient to buy from Europe market directly. Because of the heavy labor cost in Europe manufacture, and a long lead time from the Europe local walkable climate chamber manufacture. So the customer turn the eyes to the China walkable climate chamber manufacture supplier.
The temperature range for a walkable climate chamber is -40C +150C normally. Humidity request is 20% ~ 95%, All these testing spec requirement can be finished by China walkable climate chamber manufacture. The lead time for a walkable climate chamber from Wewon Environmental Chambers Co. Ltd. takes 35 ~ 40 days which is reasonable and customer can accept this.

walkable climate chamber

This chamber should be walkable. The cabinet is required for test cycles which are only carried out on a few modules. These cycles are also part of the DIN IEC 61215 and DIN EN 61730 as an example here would be called the moisture freeze cycle.


walkable climate chamber

walkable climate chamber

Question: Can you also please confirm the distance indicated in the below picture (the distance between the ground and the bottom of the doors) ?
Answer: The wheels height is 100 mm. You can check this dimension from the attached drawing.
Question: Can the load that is put into the cabinet be increased from 100 kg by adding additional support to them ?
Answer: If you need to make a 100 kgs samples testing, Then we need fasten the floor inside. The 6mm steel plate will be used and welding it on the floor.
Question: I intend to have up to 600 kg put onto the floor. Do these additional support have any height increases to the internal dimensions
Answer: If you made a 600 kgs samples testing, Then we will use the additional shelf structure, Your 600 kgs samples will be hang on this shelf. The solution as above photo mentioned. Please understand this is the special design and we need charge the additional cost.
Question: Can you help me doing the transport work ? We prefer the one stop service, Because we are the laboratory testing center. If you can find a logistics supplier and delivery this climate chamber to our laboratory directly. That would be great !
Answer: Yes, We can support your DDU or DDP term. Try to give the customer better service, We accept the one stop service. We have some logistics partners, have a good relationship with them. We help our customer and delivery the climatic chamber to their testing center from our factory directly. The customer pleasure on our shipping work.
Question: Can you also please inform me of the delivery time for the unit from point of order ?
Answer: Lead time is 35 ~40 days after PO receipt.


walkable climate chamber


Wewon Environmental Chambers Co., Ltd. as a manufacturer and supply walkable climate chamber for abroad partners many years ! The mainly product including : temperature humidity chamber, temperature chamber, humidity chamber, environmental chamber, environmental test chamber, climatic chamber, temperature test chamber, temperature and humidity environmental test chamber, humidity & temperature chamber.


Many thanks for your reading ! I appreciate it ! Meanwhile, I am glad to know you have the inquiry for temperature and humidity chamber. The related data as above files mentioned, Hope you like it ! For more details check, Please send us a mail. I am waiting for you there ! Thank you.


No 9, Jin Yu Ling Road, Sangyuan Industrial Zone,

Dongcheng, Dongguan,

Guangdong, 523119, China

Call Us

+86 136 9497 2540


Email: wewontech@gmail.com

© Copyright 2014-2018. Wewon Environmental Chambers Co., Ltd.